• TBD0595287301B.jpg@711476771bf4205387fff55ed435b07c
  • TBD0595287301B_1.jpg@1e3d070b677aa8a5c0c8b91c06f7fea4
  • TBD0595287301_B1.jpg@533c2e4bb5782723abd2538b56b0b0d5
  • TBD0595287301_B2.jpg@35bc72387063f2568976cfc36deac3ee
  • TBD0595287301_B3.jpg@f8b2d50ed46ac519abf56bc8ff62add2
  • TBD0595287301_B4.jpg@fb7eb55aba2d3ed7d9a080e66bcad4b5
  • TBD0595287301_B5.jpg@92414b877211cbe9cffc0ed4fb9be8be
1 7

Jonsbo M.2-3 Solid State Radiator For NVME/SSD(Grey)

Jonsbo M.2-3 Solid State Radiator For NVME/SSD(Grey)

R 269.00
R 269.00
Sale Sold out
FREE DELIVERY on all orders.

In Stock.

Shipping Guranteee

FREE SHIPPING on all orders. Fully Insured.

Handling time: 1 - 3 working days. (Onkiza has to process your order and put all your items through its strict quality-control tests.)

Transit time: 3 - 15 working days.

Return Guarantee

For whatever reason if you are unsatisfied with your order within 7 days you can return it to us in new condition for a refund minus the shipping charges.

DOA Guarantee

If your item arrives damaged, please contact us within 7 days and provide clear and valid proof. Onkiza will make compensation based on the damage situation.

Missing/Wrong Items Guarantee

If you receive a parcel with missing/incorrect/secondary packing items, please contact us within 7 days of delivery and provide the relevant proof. Onkiza will make compensation based on the damage situation.


1. Material: aluminum
2. Heat dissipation method: drainage passive heat dissipation
3. With high-quality thermal silica gel, quickly conduct heat to avoid overheating and slowing down
4. Suitable for M.2 2280g solid state drive
5. Anode sandblasting process, anti-corrosion and anti-rust, not easy to get dirty
6. Diversion type upper heat sink, solid state drive (not included)
7. The heat sink under the shell, the overall heat dissipation effect is good
8. Striped lines at the bottom increase the heat dissipation area and quickly take away heat
9. Dimensions: 24.4x7.3x6.9 cm
10. Weight: about 80 grams

installation steps:
1. Tear off the thermal pad film and stick it in the bottom card slot
2. Put the SSD PCB into the card slot with the chip facing up
3. Adjust the position of the PCB to reveal the golden fingers and screw holes
4. Stick a thermal pad on the inside of the top fin (tear off the film)
5. After jamming one side of the card slot, press to fix it
6. If you need to disassemble, slide your fingernail along the seam to open it
7. Insert the motherboard slot
8. Fix the hard drive screws (included with the motherboard)
9. Installation is complete

View full details